K10(已停产)
Overview

The K10 is nothing short of power with 12,000 W from a single rack space chassis. Capable of driving subwoofers and large-scale FOH systems equally well, numerous touring sound reinforcement systems are built around racks exclusively utilizing K10′s for all frequency bands, benefitting greatly from maximum flexibility. Operation with 2Ω loads is not only safely possible but recommended, reducing the number of amplifiers required in a system.

In use worldwide by leading touring and event sound companies, K Series is preferred among the top ranking system designers, sound engineers, and system techs on the road for making their lives easier, giving them reliable premier-grade power and headroom in the smallest possible package size.

Fully digitally controlled and with a serial PC communication port as standard, the K10 is also available with KDSP board and KAESOP Ethernet/AES3 interface: the K10 DSP+AESOP amounts to a fully integrated, highly sophisticated yet easy to use power source including state-of-the-art sound shaping and system management capabilities, remotely controllable via Powersoft's Armonía Pro Audio Suite™ (Interface available for MediaMatrix, Crestron, AMXcontrol, Q-SYS and monitoring systems).

Specification
  • Power supply
    Advanced switch-mode worldwide operating power supply technology for high performance and compact size
    Power Factor Correction PFC for extremely low mains consumption and extremely wide mains operating range
    Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers

  • Protections
    Fully protected circuit design with:

    Ac protection: shut down power supply when AC mains voltage is outside operating range
    Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
    DC protection: protects against infrasonic signal at the outputs
    VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
    Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
    Long term limiter: protects the loudspeaker against steady long term rms (non audio) signals reducing maximum output
    Thermal protection: output stages operating temperature up to 80 °C (176 °F)
    Temperature controlled continous variable speed fan, front to back airflow
    Temperature forecast with LCD traced historical behaviour

  • General
    Fixed frequency switchmode output stage for high grade sound accuracy
    Compact size - all models only 1 RU for reduced rack cost and space
    Light weight - for easier racking and shipping: 12 kg (26.5 lbs) according to configuration
    Combo XLR/6.3mm jack Neutrik input connectors with link capability
    AES3 digital input*

  • Settings
    LCD matrix interactive display
    Comprehensive-user friendly front panel display menu
    Built-in defeatable clip limiters for each channel
    Digital gain-attenuator control
    Defeatable gate selection for each channel
    User selectable gain/sensitivity
    User selectable maximum output power for each channel
    User selectable maximum mains current draw
    Lockable set-up by user selectable access key code
    Built in remote control via the RS-485 interface provides full diagnostic, operational setting and system monitoring

  • Monitoring
    Hardware monitor available for fast local diagnostic
    Load impedance measurement / display for each channel
    Output power measurements / display for each channel
    Mains voltage and current measurements / display
    Downloadable log file of functional fault events with time related trace
    Smart Card settings, parameters and upgrades functionality

  • Digital Signal Processing*
    Analog Devices SHARC® DSP architecture
    AD/DA converter: dual 24bit @ 96 kHz Tandem® architecture, 127 dB dynamic range, per channel
    Input/output independent equalizers per channel providing PEQ, raised cosine, shelving IIR filters as well as custom output FIR filters
    Delay up to 1 s for time alignment
    Active DampingControl™ for cable compensation
    Power limiter (TruePower™, RMS voltage, RMS current) + Peak Limiter

  • Remote management*
    Control and monitoring through Armonía Pro Audio Suite™
    Interface available for MediaMatrix, Crestron, AMXcontrol, Q-SYS and monitoring systems
      
    * = DSP+AESOP version

Back