LS-212
Overview

It’s difficult to believe that such a compact subwoofer can produce such accurate low frequency response. Designed to complement the Tectonic PL Series of flat panel loudspeakers and other mid – high speaker systems, the Tectonic LS-212 is a compact dual band-pass subwoofer. Comprised of two asymmetrically sized chambers, they’re optimized to deliver the highest possible output from the smallest possible footprint. The two 12” drivers are forward-facing to deliver higher-order harmonics above crossover frequency.

Specification
  • Features
    Drivers feature 3” voice coils and vented neodymium motors
    Combined 4 Ohm load can accommodate program/peak power of 1600W/2400W
    Enclosure constructed of 19-ply Baltic Birch; finished in wear-resistant black polymer coating
    16 rigging points provided w/M10 threaded sockets
    Caster Carts and heavy-duty nylon covers available separately

  • Construction Features
    Hardware/Flyware: (16) M10 Hang Points
    Dimensions (inch): 26.6” W x 14.9” H x 23.8” D
    Dimensions (mm): 676 W x 378 H x 605 D
    Weight (lbs/kg): 70 lbs (31.75 Kg)

  • Performance Specifications
    Frequency Response: 45Hz – 125Hz (-3dB)
    40Hz – 125Hz (-10dB)
    Two LS212 Cabinets
    Sensitivity: 97dB @ 1W / 1 Meter
    Max SPL Long-term: 130dB
    Max SPL Peak: 133dB
    One LS-212 Cabinet
    Sensitivity: 100dB 1W / 1 Meter
    Max SPL Long-term: 133dB
    Max SPL Peak: 136dB

  • Settings & Impedance
    HP Crossover Point: 90Hz – 130Hz
    Nominal Impedance: 4 Ohms

  • Amplification
    Continuous Power Rating: 800W RMS
    Program / Peak Power: 1600W/2400W
    Recommended Amplification: 1600W @ 4 Ohms

  • Specifications
    WOOFER SIZE 12.00” (305mm)
    VOICE COIL DIAMETER 3.00” (75mm)
    MAGNET TYPE Neodymium

Back